- A) TO SET THE DATE
Unscrew the crown and pull to the 2nd position. Turn the crown clockwise to set
the proper date. Once finished, push the crown in and screw down completely.
- B) TO SET THE TIME
To set the time, you must first unscrew the Crown by turning it counter-clockwise until the crown can be gently pulled out, pull the Crown out to reach position -3- and turn gently in counter-clockwise direction. Once finished, push the crown in and screw down in clockwise direction until you feel resistance, this is the final and watertight position of the crown
- C) MANUAL WINDING
Your watch is equipped with a Swiss Made ETA2824-2 movement. This is an automatic movement with manual winding capabilities. Manual winding the movement is necessary if the watch has not been in use for a significant amount of time, that is usually more than 24 hours.
In order to manually wind the movement, please set the crown to the 1st position and gently rotate the crown 20-20 times in clockwise direction, You will notice the seconds hand starts moving in clockwise direction.